1.54 Inch OLED Display Panel Blue Color 128x64 Dots 24PIN with Serial Interface
The 1.54-inch OLED SPD0301 display is a small, monochrome or color OLED display that uses the SPD0301 controller. It's commonly used in embedded systems, smartwatches, fitness trackers, and other portable devices that need a compact, low-power display.
SPD0301 Controller Overview:
The SPD0301 is an OLED driver/controller that supports both monochrome and color OLED displays. It is typically used in small, low-power applications. It supports SPI (and potentially I2C) interfaces for communication with a microcontroller.
While the SPD0301 controller is not as common as other OLED controllers like the SSD1306, it is still widely supported in some libraries for use with Arduino and other microcontrollers.
Detailed Parameters:
| 1 | Brand Name | Genyu |
| 2 | Model Number | GY12864-48 |
| 3 | Display Mode | OLED(Organic Light Emitting Diode) |
| 4 | Color | Blue |
| 5 | Size | 1.54 Inch |
| 6 | Dot Matrix | 128*64 Pixels |
| 7 | Module Size | 42.04(W)x27.22(H)x1.41(D) mm |
| 8 | View Area | 37.052 (W) x 19.516(H) mm |
| 9 | Active Area | 35.052(W) x17.516(H) mm |
| 10 | Dot Size | 0.254(W)*0.254(H) mm |
| 11 | Dot Pitch | 0.274(W)*0.274(H) mm |
| 12 | Drive IC | SPD0301ZD |
| 13 | Interface | 6800/8080 interface, 4 wire serial interface, I2C |
| 14 | FPC Connector | 24PIN, socket type |
| 15 | FPC Pitch | 0.5 mm |
| 16 | Drive Method | VDD=1.65V~3.3V, Vin=11.5~12.5V |
| 17 | Viewing Angle | 160° |
OLED Screens ( 0.42 inch~3.12 inch ):
We mainly develop small-middle sizes OLED displays, including 0.42", 0.49", 0.66", 0.78", 0.87", 0.91", 0.96", 1.12", 1.21", 1.3", 1.5", 1.54", 1.92", 2.08", 2.23", 2.42", 2.7", and 3.12", etc.
We can customize the FPC, Interface, Touch Panel, and PCB board based on your demands.
Pinout for 1.54-inch OLED SPD0301 (SPI Interface):
The typical pinout for the 1.54-inch SPD0301 OLED display using the SPI interface might look as follows:
-
VCC: Power supply (usually 3.3V or 5V).
-
GND: Ground.
-
CS (Chip Select): SPI chip select pin.
-
SCK (Serial Clock): SPI clock pin.
-
SDI (MOSI): Master Out Slave In (SPI data input pin).
-
DC (Data/Command): Data/Command pin, used to distinguish between data and commands.
-
RES (Reset): Reset the pin for the display.
-
VCC: Power supply pin.
-
GND: Ground pin.
FAQ
1. Q: What products can you provide?
A. 1) Custom Segment LCD Display;
2) Monochrome Graphic/Dot Matrix LCD Display Modules;
3) Micro OLED Display Modules;
4) Color TFT LCD Display Panels;
5) LED Backlights.
2. Q: Where is your factory?
A. Our office is in Shenzhen, Guangdong and our factory is in Jiangxi Province.
3. Q: Will you offer a free sample?
A: For the first cooperation, samples will be charged, and the amount will be returned at the mass order stage.
4. Q: What is the delivery time?
A: For small orders: 7-15 days. For mass production: 25-30 days.
5. Q: Can I get a lower price for OLED displays?
A: Yes, cheaper price with bigger/larger quantities order.
6. Q: How do you control the quality of products?
A: All products are 100% inspected before shipment.
